Mercedes-Benz XENTRY Diagnosis Lite - Printable Version

+- (https://hackmyride.com/forum)
+-- Forum: Diagnostics, Programming & Tuning (https://hackmyride.com/forum/forumdisplay.php?fid=1)
+--- Forum: Diagnostics & Programming (https://hackmyride.com/forum/forumdisplay.php?fid=3)
+---- Forum: Mercedes-Benz (https://hackmyride.com/forum/forumdisplay.php?fid=312)
+----- Forum: Software (https://hackmyride.com/forum/forumdisplay.php?fid=371)
+------ Forum: XENTRY Diagnosis Lite (https://hackmyride.com/forum/forumdisplay.php?fid=511)
+------ Thread: Mercedes-Benz XENTRY Diagnosis Lite (/showthread.php?tid=16822)

XENTRY Diagnosis Lite - HackMaster - 07-17-2024

What does XENTRY Diagnosis Lite have to offer?

Exclusively for independent workshops, we offer a special diagnostic solution for standard PCs: XENTRY Diagnosis Lite.

You can operate this voluntarily offered product variant on a standard PC. The scope of delivery includes the standard XENTRY Diagnosis VCI hardware to communication with the vehicle.

Who may order XENTRY Diagnosis Lite?

Exclusively for independent operators based on the EC regulations (715/2007, 692/2008, 595/2009, 582/2011, 64/2012 and 2018/858). In order to process your request as quickly as possible, we require an evidence confirmation that you belong to the authorized group of persons (motor vehicle workshop or other company dealing with motor vehicle repairs). This requires the upload of relevant documents (e.g. trade licence, entry in the commercial register, verification of professional qualification in the motor vehicle trade, or another official document proving the purpose of the business).

What do I have to consider when ordering XENTRY Diagnosis Lite?

IMPORTANT:
  • XENTRY Diagnosis Lite can only be ordered for a standard PC that does not have an active StartKey/contract.
  • Customers with an active StartKey/contract for a XENTRY Pass Thru EU system cannot order XENTRY Diagnosis Lite for the same hardware ID. They must always use another unoccupied standard PC for this purpose or wait for the contract end of the XENTRY Pass Thru EU system.

Prices XENTRY Diagnosis Lite

The purchase of XENTRY Diagnosis Lite consists of a fixed and a variable price component.

Fixed price component
  • Product-specific annual flat user fee for online operating costs and the use of support services
    (Only for a contract renewal - not for a new order)
  • One-time hardware costs for the XENTRY Diagnosis COM Kit (VCI incl. supplements)
Variable price component
  • Consumption of the purchased time credit units for the use of diagnostics data
  • Automatic management of the use time credits (by the diagnostics application)
  • A credit unit is activated when the diagnostics system is opened and continues to run until it expires even after having ended the diagnostics session or after having changed vehicles
+ Show specifications
Scope of functionality and diagnosis in XENTRY Diagnosis Lite
  • Quick test
  • Basic diagnosis (actual value, actuations)
  • Commissioning (incl. flashing, coding and parameterization)
  • Fault memory reading / deleting
  • Guided diagnosis
  • Functional diagnosis
  • Repair forecast
  • Diagnosis for all control units for all model series from 2004 (XENTRY and DAS series / no HHTWIN)
Scope of delivery
For a new order of XENTRY Diagnosis Lite, the following components are included in the XENTRY Diagnosis COM Kit:

1. XENTRY Diagnosis VCI
2. WiFi stick
3. OBD cable (16-pin)
4. USB cable (5m)
5. User information and safety instructions
6.Digital components (software, manual, help cards)


Please note:

XENTRY Diagnosis Lite enables you to perform diagnostics for vehicles of all XENTRY Diagnosis series from model year 2004 onwards.

XENTRY Diagnosis Lite has a contract period of 12 months. The XENTRY Diagnosis COM Kit (VCI) is acquired as a purchase device. The purchase of the software as well as software updates, the possibility to access diagnostic data via time credits and the authorization to use support services ends after 42 months and can be claimed beyond this, as long as the support of the hardware has not been discontinued. Annual usage fees must be paid for continued use of the diagnostic data over the entire contract period.

Important note:
Please note that XENTRY Diagnosis Lite can only be ordered by users with business domicile within the European Union plus Iceland, Liechtenstein, Norway, Switzerland, United Kingdom of Great Britain and Northern Ireland.
Your benefits at a Glance:
  • You will receive a software and hardware solution from us that is coordinated with each other and supports all Mercedes-Benz passenger cars, VAN and smart models from year 2004 onwards (except smart model #1). You are therefore not limited to Euro 5 and Euro 6 certified vehicles as with XENTRY Pass Thru EU.
  • You can purchase the XENTRY Diagnosis VCI, which previously could only be purchased in conjunction with the XENTRY Diagnosis Pad/Pad2, and run it with the XENTRY Diagnostics Open Shell software on your standard computer.
  • Communication between the software and the XENTRY Diagnosis VCI is proven, faster and more stable than with any other pass-thru capable VCI.
  • You receive software and hardware support* throughout the contract term.
*Hardware support refers to the XENTRY Diagnosis COM Kit (see scope of delivery).
What are the system requirements?
The requirement for using XENTRY Diagnosis Lite is a unique hardware-dependent StartKey.

After having installed the basic setup (using the download link in Mercedes-Benz B2B Connect) you can also order the StartKey from Mercedes-Benz B2B Connect. The hardware ID required to order the StartKey can be selected using the "ConfigAssist" tool in "System Data".

By the way: The StartKey will also make it possible for certain end devices (e.g. laptops) to run diagnosis applications using the unique hardware ID.

Also keep in mind:
  • Administrator rights for installation and updates
  • Personalized login incl. standard diagnosis right (compulsory login procedure)
  • Windows compatible PC or Laptop with Intel i5 processor or better, or similar type
  • Operating system: Windows 10 (64 Bit) or Windows 11 (64 Bit)
  • Minimum of 8 GB RAM (16 GB recommended)
  • Minimum of 150 GB free HDD, Solid State Drive (SSD) recommended (for performance and mechanical robustness)
  • Browser: Edge for Windows
  • One USB 3.0 port to connect XENTRY Diagnosis VCI via USB cable
  • One free USB port for the WiFi stick for wireless communication between diagnosis PC and VCI
  • Broadband Internet access via LAN/WiFi
  • Microsoft .NET 4.0 (or higher) installed (http://www.microsoft.com)
  • Several URLs and Ports unlocked in the local or network firewall / proxy (see table below)

Please note: 
A credit unit retains its validity following the end of the diagnosis session or after having changed vehicles until it has expired. Time credit purchased in error or that is no longer required cannot be returned or refunded. Any time credit that has not been used or activated once the contract has expired cannot be refunded. However, credit is transferred if you extend the contract. 
Your Notes on use
If you would like to use diagnosis content, you require a permanent online connection for the following:
  • Access to diagnosis data (carried out per diagnosis session)
  • Checking access authorizations for data contents (StartKey)
  • Checking contractual data
Further requirements:
The following URLs and ports must be enabled for a XENTRY Diagnosis Open Shell system in the firewall or in the proxy server. Please speak to your IT administrator and ensure that everything has been enabled.
Purpose
URL/Domain
Port
XENTRY Portal
https://xentry.mercedes-benz.com/
443 (https)
XENTRY WIS
https://retailfactory.mercedes-benz.com/iri-gui/
443 (https)
XENTRY Operation Time
https://xentry.mercedes-benz.com/xot/
443 (https)
GoToAssist
(For provision of remote support)
http://gotoassist.com
https://gotoassist.com
https://goto.com
80 (http)
443 (https)
Service24h Europe
https://compass.i.daimler.com/m4t
443 (https)
XENTRY Tips
https://xentry-tips.mercedes-benz.com/neo-reader/index.html
443 (https)
Windows Update Links
http://windowsupdate.microsoft.com
(Enabling required for *.microsoft.com)
80 (http)
XENTRY (AKT)
https://aftersales.mercedes-benz.com/
443 (https)
XENTRY Flash
https://aftersales.mercedes-benz.com
(For control unit commissioning)
443 (https)
XENTRY Diagnosis Domains
For operation of the XENTRY Diagnosis Software with and without RDS, the following domains must always be accessible and must not be blocked, even if no communication has taken place over them for a longer period of time:
  • *.daimler.com
  • *.daimler.de
  • *.mercedes-benz.com
  • *.mercedes-benz.de
  • *.corpinter.net
  • *.akamaihd.net
  • *.fastsupport.com
  • *.go2assist.me
  • *.gofastchat.com
  • *.gotoassist.com
  • *.gotoassist.at
  • *.gotoassist.me
  • *.goto.com
  • *.helpme.net
  • *.logmeinrescue.com
  • *.tokbox.com
  • *.opentok.com
  • *.pingone.eu
  • *.pingidentity.eu
  • *.startekinfo.com (MBUSA)
  • *.microsoft.com
  • *.windowsupdate.com
  • *.windows.com
  • *.time.windows.com
80 (http)
443 (https)
123 (UDP)
AddOns
http://openshell.aftersales.daimler.com/msi-updates/*
80 (http)
443 (https)
Retail Data Storage to the Internet
  • *.daimler.com
  • *.mercedes-benz.com
  • *.corpinter.net
  • *.akamaihd.net
80 (http)
443 (https)
XENTRY Diagnosis to Retail Data Storage
 
80 (http)
443 (https)
9000 (http)
7001 (tcp)
7002 (tcp)
- Hide specifications
IMPORTANT - New compulsory Login procedure
Our new security concept secures access to and use of the XENTRY Diagnosis software in two stages:

You log in with your personal user ID and password, and you also need the standard diagnostics role.
You apply for this via the UMAS platform.

Prerequisite: You have successfully completed the identification procedure. You can also start this via UMAS, unless a local identification procedure is used in your market. You will receive your role via the corresponding button on the platform. Basically you only have to go through the identification process via UMAS/IDnow once.

This security level applies to all brands and divisions, i.e. all diagnostic users must log in personally to the diagnostic device. This means that anonymous access to vehicles and back-end services is no longer possible.
In principle, you will always need the standard diagnostics role for all diagnostic activities. To control unit commissioning from series 213 model update 2020 as well as 223, the new extended XENTRY Flash role is required.

The respective rights are assigned as follows:

1. XENTRY standard diagnostic rights:

Each diagnostic user must independently apply for the standard diagnostic right via https://umas.mercedes-benz.com/umas/ and carry out the one-time identification. If you are an independent service provider (independent workshop) and do not yet have a user ID, you can apply for a respective one via the following link: https://umas.mercedes-benz.com/orgprocess/.

Please select "New Registration" if you are not yet registered as a Mercedes-Benz Group AG customer. Or select "Registered Organization" if your organization is a registered customer but you do not have a User ID.

Please contact your local IT administrator. Alternatively, you can contact support via the support button on the very right side of UMAS page (headset icon).

2. XENTRY Flash authorization:

Both XENTRY Flash-roles (Standard-Flash role and Extended Flash role for alle CeBAS vehicles) can be applied via UMAS.
Each user must independently carry out a one-time identification via UMAS to get the Flash roles.

More information on XENTRY diagnostic user rights and Flash rights can be found here.