• Options
• Login
• Register
• Desktop Style

CANdo v5.3 CAN Bus Anlyzer

• Index

  • Forums
  • Automotive Hacking
  • Software
  • BUS Analyzers
  • Hacking Software - CANdo v5.3 CAN Bus Anlyzer
• CANdo v5.3 CAN Bus Anlyzer

• CANdo v5.3 CAN Bus Anlyzer

  HackMaster > 03-14-2023, 08:55 AM

  
    CANdo v5.3.txt (Size: 113 bytes / Downloads: 0)
  
  CANdo Application 
  The CANdo Application software is designed to work in conjunction with the CANdo Interface, to provide a simple, yet powerful tool for viewing, logging & transmitting messages on a CAN network.
  
  CAN View - Fixed Mode 
  The CAN View window displays all messages received & transmitted on the CAN bus, as well as error frames & bus state changes.
  In 'Fixed View' mode, messages are displayed in fixed positions in a list. Any new message with the same 'Type' & 'ID' as one already in the list automatically overwrites the currently displayed message.
  The CAN messages maybe displayed in either decimal or hexadecimal format.
  
  
  CAN View - Cyclic Mode 
  In 'Cyclic View' mode, messages are displayed in chronological order in a list. New messages are added to the end of the list, until the cyclic buffer is full, then the list loops back to the start. The size of the cyclic buffer maybe specified in the 'View' > 'Options'.
  
  
  
  CAN Transmit 
  The CAN Transmit page consists of a CAN transmit list & a CAN Transmit Editor. The editor allows messages to be specified & then added to the transmit list. The CAN Transmit page maybe combined with the CAN View page to assist in interactive debugging of the CAN bus.
  
  Messages in the list can be stopped/started & modified while CANdo is running.
  
  Transmit messages may be triggered -

  • OnTime - periodic
    
  • OnKey - single, manually keyed
    
  • Now - immediate
    

  
  
  
  CAN Setup 
  The CAN Setup page allows the CAN baud rate, operating mode & receive filters to be specified.

  • Baud rate from 12.5k to 1M
    
  • Normal, listen only & loopback operating modes
    
  • Multiple filters for both receive buffers
    

  The CAN Setup & the CAN Transmit list can be saved to a configuration file for later retrieval.
  
  
  
  CAN Log 
  The messages on the CAN bus maybe saved to a log file for further analysis. The saved messages may also be replayed onto the CAN bus, using the replay options.
  The Log Options dialog allows the log file format to be specified, as well as the message types to be logged & replayed.
  
  
  
  CAN Bus Load 
  The total bus load presented by all the messages on the CAN bus is displayed in the status bar.
  
  

• CANdo Programmer's Guide

  HackMaster > 03-14-2023, 09:03 AM
• Next Oldest Next Newest